Abstract
In this study, the suitability of PTFE-based coating deposited on AA3003 Aluminum alloy by a non-conventional method for corrosion and wear protection was investigated. The coatings were deposited from a mixture of PTFE and alumina powders at room temperature and atmospheric pressure . The coatings were characterised with SEM/EDX, XRD and contact angle goniometer. The corrosion performance of the coatings in 3.5 wt% NaCl was evaluated using electrochemical impedance spectroscopy (EIS) and wear performance was investigated using a pin-on-disk wear tester. The results indicated that the coatings exhibited about threefold reductions in the wear rate of AA3003 alloy and a twofold increase in its polarisation resistance. This improvement was discussed in relation to the characterisation results.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yazdzad AR, Shahrah T, Hosseini MG (2008) Inhibition of 3003 aluminium alloy corrosion. Mater Chem Phys 109:198–205
Ghalmi Z, Farzaneh M (2014) Durability of nanostructured coatings based on PTFE nanoparticles deposited on porous aluminium alloy. Appl Surf Sci 314:564–569
Jafari R, Menini R, Farzaneh M (2010) Superhydrophobic and icephobic surfaces prepared by RF-sputtered polytetrafluoroethylene coatings. Appl Surf Sci 257(5):1540–1543
Fact Sheet. Applying Teflon® coatings. http://www.rjchase.com/application_guidelines.pdf. Accessed 11 Sept 2018
Zhang RH, Zhao J, Liang J (2016) A novel multifunctional PTFE/PEO composite coating prepared by one-step method. Surf Coat Technol 299:90–95
Oladoye AM, Carton JG, Olabi AG (2014) Characterization of graphite coatings produced by CoBlast™ technology. JOM 66:602–607
Fleming D, O’Neill L, Byrne G, Barry N, Dowling D (2011) Wear resistance enhancement of the titanium alloy Ti–6Al–4V via a novel co-incident micro-blasting process. Surf Coat Technol 205:4941–4947
Baroutaji A, Carton JG, Oladoye AM, Stokes J, Twomey B, Olabi AG (2016) Ex-situ evaluation of PTFE coated metals in a proton exchange membrane fuel cell environment. Surf Coat Technol 323:10–17
Young TJ, Jackson JJ, Roy S, Ceylan H, Sundararajan S (2017) Tribological behavior and wettability of spray-coated super hydrophobic coatings on aluminum. Wear 376–377:1713–1719
Multigner M, Ferreira-Barragáns S, Frutos E, Jaafar M, Ibáñez J, Marín P, Pérez-Prado MT, González-Doncel G, Asenjo A, González-Carrasco JL (2010) superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: effects on its microstructure and subsurface mechanical properties. Surf Coat Technol 205:1830–1837
de Mello JDB, Labiapari WS, Ardila MAN, Oliveira SAG, Costa HL (2017) Strain hardening: can it affect abrasion resistance? Tribol Lett 65:67. https://doi.org/10.1007/s11249-017-0850-8
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Oladoye, A.M. et al. (2019). Corrosion and Wear Resistance of PTFE-Al2O3 Coatings Deposited on Aluminum Alloy by a Microblasting Process. In: TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-05861-6_74
Download citation
DOI: https://doi.org/10.1007/978-3-030-05861-6_74
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-05860-9
Online ISBN: 978-3-030-05861-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)